Short videos from our engineers on PET bottling air, booster compressors, sizing, air leaks and air treatment. Each one links to a detailed guide if you want the full picture. New videos are added regularly; you can also follow us on YouTube.

Screw air compressors from 10 to 350 HP, PET bottling compressors, high-pressure boosters, heat exchangers and pressure vessels, made in Sonipat for more than 40 years.
Read: Colt company profile →
Preform, heating, stretch, pre-blow and final blow: how a PET bottle takes shape in a few seconds, and why the final blow needs steady high-pressure air.
Read: PET bottling air compressors →
From preform to pallet: blow moulding, air conveyors, capping, labelling, packing and the small valves and actuators that all run on compressed air.
Read: PET bottling air compressors →
Why a PET plant needs two separate compressed air networks, and why high-pressure lines need rated pipes and fittings.
Read: PET bottling air compressors →
A booster raises plant air to blowing pressure; a dedicated high-pressure compressor does the whole job in stages. Which one suits your line?
Read: 40 bar for PET: reciprocating or booster? →
A simple four-step way to estimate your PET line's compressed air demand and match it to a compressor's rated free air delivery.
Read: PET blowing air sizing guide →
Blow air goes inside the bottle. How oil, water and dust in that air affect hygiene and bottle quality, and how to keep them out.
Read: Oil-free vs lubricated compressors →
At 7 bar, a 3 mm leak wastes about 4 kW non-stop. How to find leaks with soapy water and fix them.
Read: Screw compressor running cost →
Compressor, receiver, dryer, filters: why clean, dry air comes from the whole chain and not from the compressor alone.
Read: Air receivers, dryers and filters →